Test and Tag Kelburn

Test and tag confirms that the plug-in electrical equipment in your Kelburn workplace is safe to use. We look over each item, test it with a portable appliance tester, fit a tag with the test date and hand you a register of everything checked. Anything that fails is taken out of service and reported to you on the spot.

Student flats and village cafés: test and tag in Kelburn

Kelburn grew up around the cable car, and today the university campus at the top of it shapes much of the local work. Streets near the campus have a large rental market, and many of those houses come with landlord-supplied heaters, fridges, washing machines and microwaves. Kelburn Village adds cafés and small shops, and there are offices and research groups tied to the university.

For landlords, regulation 26 of the Electricity (Safety) Regulations is the key rule. Appliances you supply with a tenancy are deemed electrically safe if they carry a current tag under AS/NZS 3760, or if they were supplied through RCD protection when first made available. In an older Kelburn house that has been renovated in stages, not every circuit may have an RCD, so tagging the supplied appliances is often the cleaner route. We can test the RCDs at the board on the same visit so you know which applies.

Student flats are hard on appliances. Heaters get moved from room to room, cords get caught in doors, and extension leads end up running to desks on every floor. A visit between tenancies, when the house is empty, is the easiest time to test and to replace anything worn. Kelburn is also exposed to strong wind, so outdoor heaters and leads on café decks and flat balconies get extra attention at the plug and cord grip.

Local tip: Kelburn landlords should book testing between tenancies, ideally in the summer break, when flats are empty and appliances are easy to reach.

Test and Tag in Kelburn: Local Conditions

Central Wellington testing is mostly offices, shops, cafés and hospitality venues in multi-storey buildings, where we work floor by floor around your staff. Building access, lifts and parking are sorted before the day.

Building sites on Wellington's hills are hard on leads and tools dragged over rough ground.

Homes in Kelburn

Kelburn's early 1900s houses were built for the city's more affluent residents, and many have been extended and renovated several times. That often leaves a switchboard that has been added to rather than replaced, and some original rubber-insulated cable in parts of the house. Renovations are a good time to bring the board up to date, because current wiring rules require RCD protection on new and altered circuits. Higher-end renovations here often include LED downlights, dimmers, smart switches and feature lighting, which we plan with the switchboard capacity in mind.

The suburb's investors formed a company in 1898 to build the cable car, and Kelburn's growth followed its opening in 1902.

Our electricians are in and around Wellington Botanic Garden and Wellington Cable Car and the rest of Kelburn most weeks. For everything else, see electricians in Kelburn.

How We Handle Test and Tag in Kelburn

We remind you when retesting is due and book a visit that suits your Kelburn business, so the register stays current.

Pricing: a free quote and a fixed price agreed before we start. You get a written, itemised quote, and small jobs can be quoted from photos.

Test and Tag Jobs We Do in Kelburn

Scheduled retest visit
Failed plugs and leads replaced
Extension lead and power board testing
Café and kitchen appliances
Building site tools and leads